< >

Glorious Dental CAD /CAM Zirconia Block

Zirconia teeth are of extremely high quality. It is said that its high quality is not only because of its materials and expensive equipment, but also because it uses the most advanced computer-aided design, laser scanning, and then controlled by computer programs. It is perfect.

Contact Now

Product Details

Product Introduction

Zirconia is an excellent high-tech biological material. Good biocompatibility, better than various dental alloy restoration materials. Zirconium has no irritation and no allergic reaction to the gums. It is very suitable for oral cavity application and avoids allergies, irritation, corrosion, and other adverse stimuli caused by metals in the oral cavity. Unique resistance to rupture and strong curing performance after rupture.

Glorious is a professional manufacturer for CAD/CAM Ceramics Dental Zirconia Block with various grades such as :White Zirconia
Preshaded Zirconia and Multilayer Preshaded Zirconia

Multi-layer zirconia dental blank that has a gradual change in chroma and translucency though a thicness after sintering

Y203	5.3wt%
A12O3	0.25wt%
SiO2	≤0.02wt%
Fe2O2	≤0.02wt%
Na20	≤0.02wt%
Aging properties	monoclinic phase
Chemical solubility	≤200ug.cm2
Density	≥6.08g/cm2
Flexural strength	1000Mpa
Flacture toughness	5Mpam0.5
Hardness(Hv10)+2	1250

Nanometer zirconia powder	≥98%
CeO2	＜0.5%
Fe2O3	＜0.5%
Er2O3	＜0.5%
Other Oxides	＜0.5%
Diameter	98mm
Thickness	10/12/14/16/18/20/22/25mm
Color	A1,A2,A3.5,B1,B2,C2
Flexural streFeaturesngth	Monolithic crowns and bridges
	High aesthetic veneering
	7 layers with 7 popular colors

The natural feeling of tooth color and the inconspicuous crown edge are also the benefits of using zirconia all-ceramic restorations. Especially for patients with high aesthetic requirements, they pay more attention to the advantage of natural color, because this makes the restoration integrated with healthy teeth, which is difficult to distinguish.

Product parameters

Sintering Chart

Recommended sintering cuve(HT-plus/ST/pre-shadeo ST/SHT/pre-shaded SHT)

Sintering temperature of HT/ST/pre-shaded ST/pre-shaded SHT is from 1500℃ to 1550°℃ you should makesure peak temperature at this
range. The recommend edsintering temperature is 1530℃.

Sintering temperature of 3D-pro is from 1480°C to 1530°Cyou should make sure peak temperature at this range. Therecom- mended
sintering tem- perature is 1500°C

Dental Zirconia Block can be used for Dental laboratory or Dental clinic. Our Dental Zirconia Block are compatible with different kinds of CAD/CAM system and manual system.such as Open system Cercon system, Sirona Inlab system,and Amann Girrbach system

Product Application

Products Display

Dental blanks

Multi-layer zirconia dental blank that has a gradual change in chroma and translucency though a thicness after sintering.

Zirconia powder

We choose the best zirconia powder and utilize a cold isostatic pressing system to from shapes.

Zirconia block

We try to provide high quality,low cost zirconia blocks for all dental CAD/-CAM milling system,support open ar-chitecture CAD/CAM
milling system.

Our products are ceramic denture zirconia block,corre-sponding CAD/CAM equipment, 3D printing equipment and other related oral products. As professional oral materials Supplier, we can provide digital dental materials, dental equipment, dental software and full range of digital products and service  We strictly follow international and domestic medical stan dards.Inspectors in different positions including packaging to ensure the quality of products

Customer Feedback

By utilizing dental zirconia blocks, dental laboratories and clinics can create high-quality and aesthetically pleasing restorations that meet the functional and cosmetic needs of their patients.

If you have any specific questions or if there is anything else I can assist you with regarding dental zirconia blocks, please let me know!