dental sintering oven-manufacture,factory,supplier from China

GS07 Dental Sintering FurnaceProduct AdvantagesIntelligent PID ±0.1C Temperature Control 1.PID temperature control system Self-developed PIDtemperature control system, which can achieve a maximum temperature error within ±0.1 degrees2.24h uninterrupted workSupport 24-hour uninterrupted work, and can automatically shut down after work, saving energy and improving safety.3.Cool max3.0 cooling technologyAdopting cool max3.0 cooling technology, the furnace body quickly dissipates heat outside to ensure the long service life of the product.【42 minutes】Rapid sinteringPrecise temperature co

Dental Restoration Sintering Retention Material Sintering PasteMain component The product consists of alumina, quartz, hydroxyethyl cellulose, polyethylene fermentation and distilled waterScope of applications Suitable for veneer, inlay, high inlay, partial crown, single crown, bridge and other restorations which are inconvenient to be placed directly on the sintering tray or sintering nail during the process of porcelain baking or glazingIntended use This product is used to stabilize restorations placed directly on the sintered dish or on the sintered nail during the porcelain

PRECAUTIONSOur Zirconia Block be made of the biological zirconia powder with isostatic pressing method and keep processing in machine center.We can do the zirconia block according to the clients the requirement. HT Zr - Normal translucent zirconia, applied for crown and bridges ST Zr - Super translucent zirconia, applied for crown and bridges especially for full contour crown and bridgesInstructionsRecommended sintering curve(HT-plus/ST/pre-shaded ST/SHT/pre-shaded SHT)Sintering temperature of HT/ST/pre-shaded ST/ preshaded SHT is from 1500°C to 1550°C, you should make sure peak temperatu

GK07 Dental Porcelain FurnaceVacuum degree 97%PID Control             Simple Operation        Quick CoolingAl Precise TemperatureControl Of ±0.1℃Self-developed high-precision power control program, usingmulti-stage PID precise temperature control technology            Large furnaceCan accommodate more dentures at the same time and improve batch sintering efficiencyOur Dental Porcelain Furnace "3 Advantages"Remote control is available, supporting remote versionu

Product DescriptionSafety: Our 3D Multilayer Dental Zirconia Block high flexural strength, fracture resistance, exceptional durability, and easy milling properties with precisionComfortability: 3D Multilayer Dental Zirconia Block have Low thermal conductivity,hot and cold changes do not stimulte the pulpEasy Handling: 3D Multilayer Dental Zirconia Block consisting of three pre-colored layers, polish or Glaze after Sintering ideal for full contour crowns and bridgesvita 16 colors plus BL1-BL4 colors displaySpecificationModel Number3d proPower SourceMachineryWarranty1 YearAfter-sale ServiceOnlin

Product introduction     Introducing the Dental Vacuum Cleaner, a must-have tool for every dental clinic or office. This powerful and efficient machine is specifically designed to handle the unique cleaning needs of the dental industry.Key Features:·Superior Suction Power: The Dental Vacuum Cleaner ensures optimal cleaning and suction capabilities, effortlessly removing debris, saliva, water, and other waste materials from the patient's mouth.

Product Description     Dental lithium disilicate is a type of ceramic material commonly used in the fabrication of dental restorations such as crowns, veneers, inlays, onlays, and bridges. It is known for its excellent esthetic properties, strength, and durability, making it a popular choice among dental professionals.The following are some characteristics of our company's glass ceramics:Esthetics: Dental lithium disilicate has the ability to mimic the natural appearance of teeth, providing a highly esthetic and lifelike result.

Product Introduction     Dental 3D printer is a specialized device used in the field of dentistry to create three-dimensional dental models and various dental prosthetics or restorations. Here are some key aspects and features of dental 3D printers:     Material Compatibility: Dental 3D printers are compatible with a range of dental-specific materials, including photopolymer resins, biocompatible polymers, and dental ceramics.

DENTAL DIGITAL SCANNERDental 3D scanner is launched!

4D Multilayer ZirconiaExcellent 4D Zirconia Dental Material, a high-quality choice for dental laboratories and dental clinics! Product DescriptionDental Zirconia block is a high-tech biomaterial that is widely used in dental restorations due to its excellent biocompatibility.

Product Description      Although there is no metal support, the cad cam-designed zirconia teeth have higher strength, dense edges, and high precision.　 ① has a very high bending strength, the current strength of dental zirconia block materials registered has reached 900MPa, while the medical standard for dental materials is 100MPa.The aesthetic anterior veneer dental zirconia reaches to 700MPa.　 ② Because of its strength advantages, the doctor does not need to grind the patient’s real teeth too much.vita 16 colors plus BL1-BL4 colors displaySpecificatio

Product Introduction      Dental 3D printers can be used to produce dental prosthetics, such as crowns, bridges, dentures, and orthodontic appliances.

Product IntroductionDental zirconia blocks are an essential component in the fabrication of dental restorations, such as dental crowns, bridges, and implant-supported structures.

      Glorious 5 axis milling machine is a highly advanced and sophisticated equipment that has revolutionized the dental industry. This state-of-the-art technology has significantly improved the cutting and milling capabilities of dental laboratories worldwide.

Product Intructions     One of the most notable benefits of using the Glorious 5 axis dry milling machine is its ability to handle different types of dental materials, including the most complex ones. This feature makes it easy for dentists to create dental prostheses like crown, bridge, inlays, and onlays.

DENTAL 3D SCANNER3D scanning technology opens the era of digital medical diagnosis and treatmentModel: ETA QUICK SCAN3D DENTAL SCANNERSingle jaw scanning takes only 22 seconds, the entire process ofmold-parting orders can be completed in 2 minutes, and the entireprocess of non-mold-parting orders can be completed within1.5 minutes.AUTOMATIC ALIGNMENT FUNCTION▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔    The powerful automatic alignment function eliminates the need for manual alignment of its model data, and can also achieve automatic alignment when scanning wi

Product Description     Zirconia is indeed an exceptional high-tech biomaterial. It exhibits excellent biocompatibility, surpassing many other dental alloy restoration materials. Zirconia has the advantage of not causing irritation or allergic reactions in the gums, making it highly suitable for use in the oral cavity.     By using zirconia dental restorations, it becomes possible to avoid potential allergic reactions, irritation, and corrosion that may be caused by metal materials in the oral cavity.

Products DescriptionLithium Disilicate in dentistry application is now available in every dental care facility as it’s made in the laboratories or chairside using the CAD/CAM technology.

DENTAL 3D SCANNERDental desktop scanner · Dental lab scanner · Dental CAD CAM scannerModel: ETProduct  Introduction▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔The scanbox is a fully automated,open 3D dental scanner from smartoptics. The scanBox is supplied withoutCAD software and can be used with every open CAD software.

Cost- effective, high precision 5-axis simultaneous machining of small parts Cad cam 5 Axis Dental Milling Machine is a modern digital dental technology.

5T PROMultifunctional Composite Dental Milling MachineProduct OverviewSupport zirconia, wax, glass ceramic, preformed titanium post, pmma, peek and other dental materials;comprehensive functions, equipped with a variety of fixtures to choose from, a variety of machining processes easy to handle!High-performance spindle:40,000rpm high speed true servo drive;4000w high power spindle, strong power, high efficiency cuttingDerived from German CNC technology, 5-axis linkage, B-axis ±30°,A-axis 0°~360° ultra-large angle machining, higher contour precision.Omni-directional warning system: Timely alarm

Products Display     Glorious 5 axis milling machine is a highly advanced and sophisticated equipment that has revolutionized the dental industry. This state-of-the-art technology has significantly improved the cutting and milling capabilities of dental laboratories worldwide.

5T PROMultifunctional Composite Dental Milling MachineProduct OverviewThis dental milling machine supports a wide range of dental materials such as zirconia, wax, glass ceramic, preformed titanium post, PMMA, PEEK, and more. It offers comprehensive functions and comes with various fixtures to choose from, making it easy to handle different machining processes.The machine features a high-performance spindle with a 40,000rpm high-speed true servo drive and a 4000w high-power spindle for efficient cutting and strong power.

——  GZ52 Multi-Functional Dental Milling Machine ——Discover a cutting-edge dental milling machine that exceeds your expectations and unlocks endless possibilities! This innovative product boasts comprehensive features that are sure to impress.Equipped with five axes and five linkages, this machine offers versatility for both wet and dry applications. It comes with four types of fixtures for various materials and uses, such as dry-cut zirconia, wet-cut glass ceramic, titanium rod, orthodontic dental models, and calibration fixtures.